Jump to content
TUFLOW Forum
jiwaszko

Odd pit inflows

Recommended Posts

Hi, 

We're currently modelling a 460ha catchment with rainfall on the grid. We are modelling roughly 2000 pits and pipes in the network. I have run ten ARR2019 temporal patterns for the 1% AEP 30 minute duration storm, and on first glance all seems well. However, I started looking at the flow going into all the pits and found a lot of the pits are showing a strange inflow hydrograph. It generally looks like the top of the hydrograph I’m expecting to see has been inverted on itself. See attachment.

 It seems to mainly occur where there is substantial flooding around the pit entry area. It also always starts around the 0.2 hour mark, generally a little before but it changes by pit. I was hoping someone could offer some advice.

 Many thanks

Pit inflow hydrograph.png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...